Foxtrades396

In this hi-tech life, we always need a working internet connection to manage both our professional and personal life. The most comfortable way to access internet everywhere anytime is by buying mobile data recharges but they are very expensive. Another good way to connect to free WiFi if it’s luckily available at your workplace, college or home. But everyone is not that lucky.

• How To Crack Irdeto 2 Encryption Software
• How To Crack Irdeto 2 Encryption Key
• How To Crack Irdeto 2 Encryption Windows 10
• How To Crack Irdeto 2 Encryption Decryption

Everybody might have many fast WiFi hotspots available in their smartphone’s range, but they don’t have access to those WiFi connections because they are password protected and you don’t have access to them so, you can’t use those WiFi hotspot to access internet in your smartphone or laptop. But, what if you can hack a WiFi?

How To Crack Irdeto 2 Encryption Keys Tuesday 21 May admin. Hello everybody. I'd just see that ird2 is fully hacked on some countries of europe, as all may know, the emus are here a lot of time ago, the only we need to make this emus works is the key (I think, the RSA key) of the provider, and then the emu will do the same work the original. How To Hack WiFi with WEP, WPA & WPA2 PSK Encryption & Crack WiFi Password In this hi-tech life, we always need a working internet connection to manage both our professional and personal life. The most comfortable way to access internet everywhere anytime is by buying mobile data recharges but they are very expensive.

Yes, I am not joking. What if you can hack any WiFi available in your range and crack it’s password to access free and unlimited internet? IMO, if you can learn a way to hack a WiFi network then you can access free internet everywhere. Right?

So, I am telling you the method to hack a secured WiFi network, crack its password and enjoy free internet using it.

Before moving directly to the methods to hack WiFi networks lets first see what type of security and authentication methods are implemented in WiFi networks.

WiFi Security & Encryption Methods

• Open – This is WiFi networks with no authentication. Anyone in the WiFi range can connect his device to the network without any password in enjoy free internet. However, these networks are rarely available and also risky.
• WEP – Wired Equivalent Privacy (WEP) is a security protocol, specified in the IEEE Wireless Fidelity (Wi-Fi) standard, 802.11b, that is designed to provide a wireless local area network (WLAN) with a level of security and privacy comparable to what is usually expected of a wired LAN.
• WPA – WiFi Protected Access (WPA) is improved and more secured security protocol which arrived with lots of improvements in encryption and authentication methods of WEP.
• WPA2 PSK – It is short of Wi-Fi Protected Access 2 – Pre-Shared Key which is the latest and most powerful encryption method used in WiFi networks right now.

Hacking WiFi Networks with WEP, WPA and WPA2 PSK Security

As security features have been improved from WEP to WPA to WPA2 PSK WiFi authentication protocol, so obviously, WEP WiFi networks are very easy to hack compared to WPA and WPA2 PSK Security methods.

Almost every password-protected WiFi networks support both WPA/WPA2 PSK authentication. If somebody is already connected to the network, you can check in his network properties to see what encryption-type is being using by the targeted WiFi network.

But if you want to know encryption-type of WiFi network which is not connected to any device in your reach, you need Ubuntu operating system to do this.

In Ubuntu, you can use nmcli command in terminal which is command-line client for NetworkManager. It will show you security types of nearby Wi-Fi access points. Enter the following command in terminal:

It will show you the output like this:

Using the above methods, you should have known the encryption-type of targeted WiFi network which you want to hack. So, I am gonna show you how to hack WiFi Network for each of WEP, WPA and WPA2 PSK secured WiFi networks.

Requirements for Hacking WiFi Netwoks

How To Crack Irdeto 2 Encryption Software

My methods require KALI Linux which is especially designed Linux distrbution for penetration testing and ethical hacking. You can download it for free from its official site. Download Kali Linux ISO from its website either install it as separate operating system in your system or you can use Virtual Machine/VMware to directly run KALI Linux inside Windows.

You will also need Aircrack-ng which is a security suite to assess WiFi network security. It focuses on different area of WiFi security: monitoring, attacking, testing and cracking.

Another important requirement is to check if your wireless card is compatible with Aircrack-ng or not. Because if it’s not compatible, you need to have an Aircrack-ng compatible card. Check it directly here: http://www.aircrack-ng.org/doku.php or run aireplay-ng -9 mon0 command inside terminal to view the percentage of injection your card can do.

Install Aircrack-ng using the following command in KALI LINUX

• sudo apt-cache search aircrack-ng (to seach aircrack-ng or any related repositories)
• sudo apt-get install aircrack-ng (to install aircrack-ng repository)

Fulfill only these requirements and you are ready to hack any WiFi network, whether it is a WEP, WPA or WPA2 PSK Wi-Fi.

Steps to hack WiFi Networks

How To Crack Irdeto 2 Encryption Key

Starting below, I’ll be guiding you step-by-step in hacking a secured WiFi network. You can either scroll down to read each and every WiFi hacking method or can directly jump to the required section below using these links:

There are various methods to hack into WiFi network and crack its password for all the above security-types but I am showing only those methods with which I’ve had success in cracking password of desired WiFi network and hack secured WiFi Access points. So, if you follow these steps correctly, you’ll also be able to hack any WiFi hotspot available in your reach.

How To Hack WEP WiFi Network

In this method, we are going to hack WEP secured WiFi network using packet injection method inside KALI Linux operating system. So, start KALI Linux in your system. Now follow these below steps:

Step 1: Check Wireless Interface

• Open terminal in Kali Linux and enter the command airmon-ng. It will show you what network interface are you using. In my system, I have only one network interface card wlan0, which is my wireless interface card.
• Create a network interface which runs in monitor mode. To do this enter command airmon-ng start wlan0.Make sure to replace wlan0 in command with the interface name that your card have. Here, mon0 has been created.
• Now, you might or might not get the warning appearing in the below screenshot which tells other processes using the network which can create the problem. So, you can kill them using the syntax: kill PID if you know those processes are not important for you at the moment.

Step 2: Scan available WEP WiFi networks

• Now, enter the command airodump-ng mon0 to scan & list down all the available WiFi networks using created monitor interface (mon0). It can take time to all the available WiFi networks in range.
• Once the process is done,all the available WiFi access points will appear with their important details: BSSID (WiFi Access Point MAC Address), PWR (Signal strength value; the lower, the better), CH (Channel for WiFi), ENC (Encryption type), AUTH, ESSID (Name of WiFi)
• Select the WiFi network with WEP Encryption (ENC) and lowest PWR value.

Step 3: Attack the selected WEP WiFi Network

• Open another terminal concurrently and enter command: aidodump-ng -c 1 -w bell –bssid 64:0F:28:6B:A9:B1 mon0. Here, -c 1 indicates channel number which is 1, -w bell is to write data in file “bell”, –bssid 64:0F:28:6B:A9:B1 is MAC address for my selected WiFi access point and mon0 is monitor interface that was created above. Hit Enter and it will start sending packets (visible in #Data) to the WiFi

• The speed of sending data is very slow but you need to escalate it by attacking the WEP WiFi network. First enter the command airplay-ng -1 0 -a 64:0F:28:6B:A9:B1 mon0 to perform fake authentication (-1 in command) to the network.
• Now we will perform ARP REPLAY Attack to the WiFi network to climb the data to the network at enormous rate. Useairplay-ng -3 -b 64:0F:28:6B:A9:B1 mon0, where -3 is for ARP REPLAY attack. Hit enter and the command will start doing attack to WEP WiFi Access point and you can see the #Data value increasing at enormously fast rate.
• In below screenshot the bell-01.cap is the file where data is being stored that we will use to crack the password of this WEP WiFi network once we have enough data (recommended #Data value should be over 35,000).

• Once you have enough data in the file bell-01.cap, run the command aircrack-ng bell-01.cap. It will test all the data values available in key file and automatically show you the key it found by testing data in file.

• You can see in above screenshot that we have successfully cracked the password of targeted WEP WiFi network
• The key found will not be in those text or alphanumeric format that the WiFi owner has created. It will be in hex format but work just fine.
• Now, to use this key, firstly start the processes you have killed in Step 1 above using the command I have used below.

• Finally enter the cracked key 61:32:58:94:98 (without colon) as the password of targeted WEP WiFi Network and it will be connected.

How To Crack Irdeto 2 Encryption Windows 10

Steps to Hack WPA/WPA2 Secured WiFi Network

Hacking into WPA/WPA2 WiFi Network is very tough, time & resource consuming. The technique used to crack WPA/WPA2 WiFi password is 4-way handshake for which there is a requirement to have at least one device connected to the network.

In WPA/WPA2 security method, the allowed password can have both large and small alphabets, numbers and symbols. And, allowed size of password is 64 characters. On a rough guess, if we consider password to be only 8 characters long and eliminate the use of symbols even then if you want to crack WPA or WPA2 WiFi password, using the brute force method the password combinations will be: 8^26+26+10=62 which is equals to:

• 98079714615416886934934209737619787751599303819750539264

So, even in fastest computer you can manage to use, it’s going to take hours.

Aircrack-ng have all the tools required to crack into WPA/WPA2 PSK WiFi network. It can perform 4-way handshake by disconnecting/connecting the connected device and capturing WPA handshake. It can perform brute-force attack but you can’t hope to crack the password if you have wordlist/dictionary for the password (which is already too big in size) with password inside it. I hate to tell you this but yes, doing it on your own can take forever.

However, there is a tricky way to crack WPA/WPA2 WiFi Password quickly which only requires you to be a bit lucky. The tool is fluxion. Fluxion use same 4-way handshake technique to crack secured WPA/WPA2 WiFi access points password but it doesn’t require you to have dictionary or perform brute force attack. So yes, it’s going to minimize your time to hack WPA or WPA2 WiFi networks password multiple folds.

Instead of doing this, it performs a little bit of phishing where the already connected user is asked to enter password of WiFi network again for security reason and when the user enter the password, first the handshake is checked with the earlier captured handshake of the device, if handshake is correct that means the password entered by user is correct. Once it is successful, Fluxion returns the key required to authenticate the network.

Steps to crack WPA/WPA2 WiFi Password using Fluxion

• Scan the networks.
• Capture a handshake (can’t be used without a valid handshake, it’s necessary to verify the password)
• Use WEB Interface *
• Launch a FakeAP instance to imitate the original access point
• Spawns a MDK3 process, which deauthenticates all users connected to the target network, so they can be lured to connect to the FakeAP and enter the WPA password.
• A fake DNS server is launched in order to capture all DNS requests and redirect them to the host running the script
• A captive portal is launched in order to serve a page, which prompts the user to enter their WPA password
• Each submitted password is verified by the handshake captured earlier
• The attack will automatically terminate, as soon as a correct password is submitted

I can understand that not all readers will be able to implement the method after reading such summarized version on hacking WPA/WPA2 PSK WiFi Network. So, below is the video tutorial on cracking WPA2 WiFi Access Point password using Fluxion.

https://youtu.be/4XLUVfoJqo8

Comments below if you face any problem in hacking WEP, WPA and WPA2 PSK WiFi Networks using the above methods.

Must Read –How To Hack a Website using SQL Injection

In this article will learn how you can crack WPA2 encryption password file.

If you want to secure 100% wireless network, then the best method is to disable wireless, but if you use it, then you cannot.

Wi-Fi was first developed in the late 1990s, with WEP encryption which stands for Wired Equivalent Privacy this was created to give wireless communications privacy and confidentiality. However, nowadays WEP encryption is terribly flawed and easily cracked.

As a replacement of WEP (Wired Equivalent Privacy) encryption, most of the wireless access points use Wi-Fi Protected Access II with a pre-shared key for wireless security, which also known as WPA2-PSK.

This is stronger encryption algorithm, AES, that is very difficult to crack—but not impossible. Researchers found that the weakness in the WPA2-PSK system is that the encrypted password is shared in what is known as the 4-way handshake. Here, when a client (User) authenticates to the access point (AP), the client and the AP go through a 4-step process to authenticate the user to the AP.

If we can grab the password at that time, we can then attempt to crack it.

Let’s Start with Step by Step

In this article will use ALFA Network Card as a WIFI Adapter. Now first will start our wireless adapter in monitor mode. This is the same way we put a wired adapter into promiscuous mode. This way ALFA card allows us to monitor all of the wireless traffic that pass through the air.

• airmon-ng start wlan0

How To Crack Irdeto 2 Encryption Decryption

As of now, our wireless adapter is in monitor mode; we can see all the wireless traffic that passes by in the air. We can capture the traffic by using the another airodump-ng command.

This allows us to capture all the traffic that your wireless adapter can see and let you know sensitive information such as BSSID (the MAC address of the AP), power, strength, the number of beacon frames, channel, the number of data frames, encryption (if any), and ESSID.

• airodump-ng mon0
  

Always remember that all the visible APs are listed on the upper part of the screenshot, and the clients are listed on the lower part of the screenshot.

Our next step is to focus on one channel and capture sensitive information from it. Note down the BSSID and channel.

• airodump-ng –bssid 02:32:12:65:87:37 -c 6 –write WPA2crack mon0
• 02:32:12:65:87:37 is the BSSID of the Access Point
• -c 6 is the channel the Access Point is operating on
• WPA2crack is the file you want to write to
• mon0 is the monitoring wireless adapter*

Let’s capturing data from one AP with an ESSID of CISCO on channel 6. The CISCO is probably a default SSID, which mostly prime targets for wireless hacking as the users that leave the default ESSID usually don’t spend much effort securing their AP too.

To crack the encrypted password, we need to have the at least one client authenticating the Access Point. If any client already authenticated with access point then we can de-authenticate their system so, that his system tries to automatically re-authenticate the same, here, we can easily capture their encrypted password in the process.

• aireplay-ng –deauth 100 -a 02:32:12:65:87:37 mon0
  

• 100 number of de-authenticate frames we are sending to the client
• 02:32:12:65:87:37 is the BSSID of the AP
• mon0 is the wireless monitoring adapter

As per the above step, we forced the client to re-authenticate, airodump-ng will attempt to capture their password in the new 4-way handshake. We can check the same by going airodump-ng terminal whether we have been successfully capturing the 4-way handshake or not.

Bingo, as you can see that in the top most line to the far right, airodump-ng captured “WPA handshake.” By checking this way, we can verify that we were successfully captured the encrypted password!

As of now, we have the encrypted password in our WPA2crack file; it is time to run that file against aircrack-ng tool using a password file of our choice. You can be only able to crack the password by giving good password file. Here, I have used big password list included with aircrack-ng on Kali Linux.

Crack the password now:

• aircrack-ng WPA2crack-01.cap -w /pentest/passwords/wordlists/mywordlist
  

WPA2crack-01.cap is the handshake password file.

• /pentest/passwords/wordlist/mywordlist is the password file path

Yes, this process may take time depending upon password file and password. You may need to wait a few minutes to a few days. After successfully crack the password, it will appear on your screen.